Chapter 6 Pass / Fail Criteria - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Digital CELEBRIS Pentium PC
Chapter 6
As Final Acceptance Test the following tests should be run to meet the Pass/Fail criteria:
1) Successful completion of the POST tests.
2) Successful completion of the following QAPLUS/fe module tests (one pass):
♦
System Board
♦
Memory
♦
Video
♦
Hard Disk
♦
♦
Floppy Disk
♦
Keyboard
♦
COM Ports
♦
LPT Ports
♦
Pointer Device
3) Successful bootstrap of the on the computer installed Operating System.
Operating Systems Supported:
◊
MS-DOS version 6.22 and earlier
◊
OS/2 version 3.0 and earlier
◊
SCO UNIX System V release 3.2.4
◊
Windows 95
◊
Windows NT
◊
Windows NT Server
◊
Novell Netware 3.12 and 4.1 and earlier
◊
SCO ODT
Remove any software that was put on the hard drive to enable repair of the system before shipping.
When completed carefully clean the outside of the unit with cleaning solution.
MCS Logistics Engineering - Nijmegen
(all tests)
(all tests)
(all tests)
(all tests, except: Sequential write/read (destructive test !!) and
Sequential write/random read (destructive test !!))
(all tests)
(all tests)
(all tests)
(all tests)
(all tests)
Pass / Fail Criteria
Pass / Fail Criteria
81