Removing The 3½-Inch Diskette Drive (Full-Profile Models) - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Ser vi ce Pr ocedur es
Removing the 3½-Inch Diskette Drive (Full-Profile Models)
To remove the 3½-inch diskette drive:
1) Turn off the computer.
2) Disconnect external devices, ac power, and monitor power.
3) Unlock and remove cover.
4) Remove two screws securing the right side of diskette drive to chassis.
5) Open the device bay & power supply subassembly.
Refer to "Opening the Device Bay & Power Supply Subassembly" .
6) Disconnect power and ribbon cables.
C
7) Remove two screws securing diskette drive to chassis.
E
8) Slide the diskette drive out of the front of the chassis.
L
E
B
R
S
5
8
6
46
D i gi t al C ELEBRI S Pent i um PC
M C S Logi st i cs Engi neer i ng - N i j m egen
DEC00350-4