Fixed Disk Setup Options - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Digital CELEBRIS Pentium PC
Boot Options
(continued)
Menu Fields Settings
Summary Enabled
Disabled
screen

Fixed Disk Setup Options

IDE Adapter 0/1 Master/Slave
Menu Fields Settings
Autotype fixed
disk
Type 1 to 39
User
0 to 4095
Cylinders
1 to 64
Heads
0 to 63
Sectors/track
Landing zone 0 to 4095
Write 0 to 4095
precomp None
Multi-sector 4 blocks
transfers 8 blocks
16 blocks
32 blocks
Auto
Disabled
LBA control
mode Enabled
32 bit I/O Disabled
Enabled
Fast PIO3
Transfer
mode Standard
Fast PIO1
Fast PIO2
MCS Logistics Engineering - Nijmegen
Comments
Enabling this option causes the computer to display configuration
parameters (in the form of a summary screen) during boot.
Comments
Press [Enter] to detect and fill in the installed hard disk drive
parameters in the remaining fields.
Selecting 1 to 39 automatically fills in the remaining fields in this
menu.
Selecting User prompts to fill in the remaining fields with the
installed hard disk drive's parameters.
Displays the number of cylinders.
Displays the number of heads.
Displays the number of sectors/tracks.
Displays the number of cylinders specified as the landing zone for
read/write heads.
Displays the number of cylinders that have their write timing
changed.
Determines the number of sectors per block for multiple sector
transfers.
Auto refers to the size of the disk returns when queried.
Enables or disables the LBA hard disk drive addressing option.
Enables or disables the 32-bit hard disk drive data transfer option.
Selects the method of data transfer to and from the hard disk drive.
Autotype the hard disk drive to select the optimum transfer mode.
Utilities & Configuration
21