Advanced Chip Set Control; Integrated Peripherals - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Digital CELEBRIS Pentium PC

Advanced Chip Set Control

Menu Fields Settings
Post I/O Disabled
writes Enabled
PCI slot 1/2 Default, 8, 10,
latency timer 18, 20, ..., F0
F8
VGA palette Enabled
snoop
Disabled

Integrated Peripherals

Menu Fields Settings
Mouse port Disabled
Enabled
Auto
Parallel port
Disabled
3BC, IRQ 7
378, IRQ 7
278, IRQ 5
Parallel port Compatible
mode mode
Bi-directional
mode
Serial port 1 Auto
Disabled
3F8, IRQ 4
2F8, IRQ 3
3E8, IRQ4
2E8, IRQ3
Serial port 2 Auto
Disabled
3F8, IRQ 4
2F8, IRQ 3
3E8, IRQ4
2E8, IRQ3
Diskette Enabled
controller Disabled
Exchange Disabled
diskette drives Enabled
Diskette write Disabled
protection Enabled
MCS Logistics Engineering - Nijmegen
Comments
Enabling this option increases the computer's performance.
Enables to set the PCI latency timer (in PCI clocks) for each PCI
device.
Use with VGA and non-VGA compatible PCI add-in cards to inform
card not to claim VGA palette writes.
Use to inform VGA and non-VGA compatible add-in cards to claim
VGA palette writes.
Comments
Enables or disables the mouse port.
Enables or disables the onboard port at the specified address.
Sets the onboard parallel port mode.
Compatible mode - standard printer connection.
Bi-directional mode - PS/2 compatible mode and able to receive data.
Enables or disables onboard serial port 1 at the specified address.
Enables or disables onboard serial port 2 at the specified address.
Enables or disables the onboard diskette controller.
Enables to logically exchange physical diskette drive designations.
Enables or disables the selected diskette drive's write protect option.
Utilities & Configuration
23