Celebris Pentium Full-Profile Expansion Slots - Digital Equipment CELEBRIS Pentium PC Service Maintenance Manual

Digital CELEBRIS Pentium PC

CELEBRIS Pentium Full-Profile Expansion Slots

The CELEBRIS Pentium Full-Profile computer models contains six slots for installing up to five ISA or
PCI expansion boards (refer to the following Table). These four slots are located on the computer's riser
card.
Expansion Slot Type
Slot
J4 through J6 ISA
J3 ISA
J2 PCI
J1 PCI
NOTE Only one expansion board can reside in slot J3 and J2 at any one time. These slots
have to share the middle expansion slot opening at the rear panel.
MCS Logistics Engineering - Nijmegen
Description
Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the top three expansion slot at the rear panel.
Supports full-length industry-standard 16-bit ISA expansion
boards.
Uses the fourth expansion slot at the rear panel.
Designated as a shared slot with PCI slot J2.
Supports full-length 32-bit PCI local bus expansion boards.
Uses the fourth expansion slot at the rear panel.
Designated as a shared slot with ISA slot J3.
Supports half-length 32-bit PCI local bus expansion boards.
Uses the bottom expansion slot at the rear panel.
Service Procedures
35