Cancel Double-Strike; Select Or Cancel Italic Print; Select International Character Set - CognitiveTPG A776 Programming Manual

Exceptions
The settings do not apply in page mode, However they can be set or cleared in page mode.
Double-strike printing cannot be used with bit-images or downloaded bit-images.
This command functions the same as A756 when the printer is in A756 emulation mode. In A776 native mode, the
command takes a parameter to enable and disable it.
Related information
Printer output is the same as in emphasized mode.

Cancel double-strike

ASCII ESC H
Hexadecimal
1B 48
Decimal 27 72
Turn off double-strike mode on the slip station in A756 emulation mode.

Select or cancel italic print

ASCII
ESC I n
Hexadecimal 1B 49 n
Decimal
27 73 n
Value of n: 0 = Off
1 = On
(When 0 and 1 are the least
significant bit, LSB)
Default:
0 (Off )
Turns italic print mode on or off.
Italic print mode is available for built-in, user-defined characters. This command only works on the receipt station.

Select international character set

ASCII ESC R n
Hexadecimal
1B 52 n
Decimal 27 82 n
Value of n:
A776 native mode
0 = Code Page 437
1 = Code Page 850
2 = Code Page 852
3 = Code Page 860
4 = Code Page 863
5 = Code Page 865
6 = Code Page 858
7 = Code Page 866
8 = Code Page 1252
9 = Code Page 862
10 = Code Page 737
12 = Code Page 857
Continued . . .
A776-PG00001 C 12/09
or ESC t n
or 1B 74 n
or 27 116 n
A756 emulation
0 = Code Page 437
Not 0 = Code Page 850
Chapter 5: Programming commands
A776 (B780) Programming Guide
59