Dhcp (Auto-Configuration); Inactivity Timeout; Keep-Alive Pings - CognitiveTPG A776 Programming Manual

DHCP (auto-configuration)

ASCII
US BS BS n1
Hexadecimal
1F 08 08 n1
Decimal 31 8 8
n1 = 0:
disabled
n1 = 1: enabled
Default:
enabled
Enables or disables the use of DHCP at power-up to obtain an IP address. If no address is found within two minutes,
DHCP obtains the default IP address.

Inactivity timeout

ASCII US BS HT n1
Hexadecimal
1F 08 09 n1
Decimal 31 8 9
n1 = 0: disabled
n1 = 1:
enabled
Default: enabled
Enables or disables resetting of open TCP ports after five (5) minutes inactivity.

Keep-alive pings

ASCII
US BS LF n1
Hexadecimal 1F 08 0A n1
Decimal
31 8 10 n1
n1 = 0: disabled
n1= 1:
enabled
Default:
enabled
A776-PG00001 C 12/09
n1
n1
Chapter 5: Programming commands
A776 (B780) Programming Guide
131