A776 Emulation Commands; Set Printer Id Mode; Set A776 Printer Id; Set A776 Printer Emulation - CognitiveTPG A776 Programming Manual

10 Chapter 3: Migrating to a new printer

A776 Emulation Commands

Set Printer ID Mode

Code (Hexadecimal)
1F 03 0C n
This command is ignored.

Set A776 Printer ID

Code (Hexadecimal)
1F 03 25 0F n
This command sets the printer ID response to the Printer ID command (1D 49 01)
n Printer ID
00 A776
01 A760
02 A758
03 A756

Set A776 Printer Emulation

Code (Hexadecimal)
1F 03 25 02 n
n Emulation
00 Native
01 A756 limited emulation (See list of comments earlier in this chapter)

A776 Configuration Commands

Select Slip Lines per Inch

Code (Hexadecimal)
1F 03 25 04 n
This command sets the slip station lines per inch setting.
n Line spacing
00 7.2 LPI
01 6.0 LPI

Select Number of Lines of Validation

Code (Hexadecimal)
1F 03 25 06 n
This command sets the number of lines of validation that can be printed.
n Number of validation lines
00 15
01-04 4 (default)
05-0F actual number (5 - 15 decimal)
A776 (B780) Programming Guide A776-PG00001 C 12/09