Select Two - Sensor Option For B780; Select Number Of Lines Of Validation For B780; Select B780 Map User Character Option For B780; Select Slip Right Margin In Page Mode - CognitiveTPG A776 Programming Manual

Select Two - Sensor Option for B780

Code (Hexadecimal)
1F 03 25 05 n
This command sets the two-sensor option for the B780 mode. When enabled, two distinct slip sensor statuses are
reported.
n
00
01

Select Number of Lines of Validation for B780

Code (Hexadecimal)
1F 03 25 06 n
This command sets the number of lines of validation that can be printed in B780 mode.
n
00-04
05-0F
This corresponds to A721 internal dip switch 3.6 and 3.7.

Select B780 Map User Character Option for B780

Code (Hexadecimal)
1F 03 25 07 n
This command selects the B780 map user characters option. This is available for A721 applications that rely on printing
user-defined characters and have not made the necessary changes for thermal character definitions. If this command
is enabled, then the characters as defined by the Define User-Defined Character Set command (1B 26 s c1 c2 etc.) will
be modifed by the printer firmware such that they print in an acceptable manner on the thermal receipt station. The
best print quality will be obtained by incorporating User Defined Characters which meet the thermal receipt station
requirements.
n
00
01

Select Slip Right Margin in Page Mode

Code (Hexadecimal)
1F 03 25 0E n
This command sets the number of lines of validation that can be printed in B780 mode.
n
00
01
02
· This command corresponds to A721 internal dip switch 3.5.
· For Page Mode printing, these are the A721 internal dip switch settings:
3.5
Off
On
· Default tabs emulate the A721 when A721 margin is configured: default tabs are at 5 dots/column instead of
6 dots/column.
A776-PG00001 C 12/09
Two-Sensor Option
Disable two-sensor option
Enable two-sensor option (default)
Number of validation lines
4 (default)
actual number (5 – 15 decimal)
Map user character option
Disable (default)
Enable
Right margin
.1" (B780 default)
.3"
.5" (A721 default)
Right Margin Page Mode
.5 "
"
.3
Chapter 3: Migrating to a new printer
Number of lines in page mode rotated orientation
17 (not available on A721)
15
15
19
A776 (B780) Programming Guide