CognitiveTPG A776 Programming Manual page 100

88 Chapter 5: Programming commands
Printer status (n = 1 or n = 49)
Bit Off/On Hex Decimal
0 Off 00 0
On 01 1
1 Off 00 0
On 02 2
2 Off 00 0
On 04 4
3 Off 00 0
On 08 8
4 Off 00 0
5 Off 00 0
On 20 32
6 Off 00 0
On 40 64
7 Off 00 0
Cash drawer status (n = 2 or n = 50)
Bit Off/On Hex Decimal
0 Off 00 0
On 01 1
1 Off 00 0
On 02 2
2 – – –
3 – – –
4 Off 00 0
5 – – –
6 – – –
7 Off 00 0
Slip paper status (n = 3 or n = 51)
Value of byte Slip Status
returned
0 There is no more printing space on the current slip, or the slip paper is not selected.
1 to 8 Remaining print area on the current slip, in number of lines, at the currently set line spacing, when the
trailing edge sensor has become uncovered. Until the trailing edge sensor becomes uncovered the value
reported will be 6, because there are at least 9 lines remaining.
Continued . . .
A776 (B780) Programming Guide
Status for transmit status
Receipt paper adequate.
Receipt paper low.
Receipt paper adequate.
Receipt paper low.
Receipt paper present.
Receipt paper exhausted.
Receipt paper present.
Receipt paper exhausted.
Not used. Fixed to off.
Slip leading edge sensor:
paper present.
Slip leading edge sensor:
no paper.
Slip trailing edge sensor:
paper present.
Slip trailing edge sensor:
no paper.
Not used. Fixed to off.
Status for transmit status
One or both cash drawers open.
Both cash drawers closed.
One or both cash drawers open.
Both cash drawers closed.
Undefined
Undefined
Not used. Fixed to off.
Undefined.
Undefined.
Not used. Fixed to off.
A776-PG00001 C 12/09