Appendix C: Electronic Journal; Electronic Journal Storage - CognitiveTPG A776 Programming Manual

Appendix C: Electronic Journal

The Electronic Journal feature is for use with an application that does not support electronic journal. The printer
can be used to store a variety of transactions.

Electronic Journal Storage

There are two methods for activating Electronic Journal:
1F 03 18 01 n Auto Journal Mode via Configuration Command:
Value of n
1
2
3
4
5
6
7
• The printer can be configured to power up in Auto Journal Mode using command 1F 03 18
01 n. Any combination of print stations can be configured. This configuration is saved over
power cycle. The electronic journal configuration information is printed on the second
diagnostic page.
• Most commands and data printed are saved in the journal flash buffer.
• Logos and graphics printed on the receipt are
• Multiple line feeds are not saved in the journal flash buffer.
• A knife cut sent to the receipt is saved in the journal flash buffer as two print commands:
0x0A 0x0A.
Auto Journal Mode via Runtime Command:
1F 0A C1 - Enable
1F 0A C2 - Disable
Commands and data printed on the receipt only are stored in the Journal flash buffer.
A776-PG00001 C 12/09
Data saved in journal
Receipt
Slip
Validation
Receipt and slip
Receipt and validation
Slip and validation
Receipt, slip, and validation
not saved in the journal flash buffer.
Appendix C: Electronic Journal
A776 (B780) Programming Guide
175