Emulation Modes; Print Setup In Emulation Modes - CognitiveTPG A798 Programming Manual

Revision C 12/09

Emulation modes

The CognitiveTPG A798 printer may be operated in a number of different emulation modes. However, printing
characteristics and defaults may differ, depending on the desired mode.

Print setup in emulation modes

Refer to the chart below for defaults and allowed printing options in each emulation mode.
Emulation LPI
mode options
Native 6.00, 6.77, 7.52, 8.13 Standard
A794, A793 6.00, 7.52, 8.13
emulations
LEGACY*
6.00
emulation
The following list clarifies how the A798 printer will behave in each emulation mode:
• If only the font is changed, the default LPI will automatically be changed as in the table above.
• If emulation is switched from any emulation to A798 native, the font and LPI will remain unchanged because the A798
native mode supports all font and LPI options offered in the emulation modes.
• The "Set Default LPI" option in the configuration menu is not offered in LEGACY emulation made. The LPI is set at
6.00.
Font(s) Font Default
options size LPI
13X24 7.52
Tall 13X27 6.77
Standard 13X24 7.52
Tall 13X27 6.00
Standard 13X24 6.00
A798-PG00001C
Chapter 3: Programming the Printer
Default Comments
EDR
3 Default setup for monochrome paper
3
3
7 Default setup for LEGACY emulation
10
27