Table of Contents
Advertisement
Initial Configuration
During the installation process, your LifeSize system prompts you to configure it for the first
time. LifeSize recommends that you gather all the necessary information prior to installation.
The following sections provide guidelines for collecting and a means of recording this data.
You may need to consult your network administrator for network settings and system
identification information.
Note:
The initial configuration screens also appear when you perform a system reset. For
more information, refer to "Restoring Default Settings" in the LifeSize Video
Communications Systems Administrator Guide.
Language
You can select the language to display in the user interface. The default is English.
Administrator and User Passwords
Some functions and preferences available from the user interface are accessible only to
administrative users with a password. For security reasons, LifeSize recommends that you
change the default administrator password (1 2 3 4) during the initial configuration.
Optionally, you can set a user password to control access to user preferences that enable
the user to do the following:
•
Change the appearance of the user interface.
•
Specify how calls are answered.
•
Configure audio settings.
•
Change cameras and DVI-I input settings.
•
Reboot the system.
The administrator and user passwords can contain any combination of the numbers 0-9 and
the symbols * (star) and # (pound) up to 16 characters in length.
Note:
If you set a user password, you can also use the administrator password to access
user preferences.
Administrator Password: ________________________________________________
User Password: _______________________________________________________
6
LifeSize Room 200 Installation Guide
Hide quick links:
Advertisement
Table of Contents
