Network Bandwidth; Domain Name Service Server; Initial Configuration - LifeSize Room Installation Manual

Hide thumbs Also See for Room:
Table of Contents

Advertisement

You can also disable ssh and web access on the system by configuring preferences in the
user interface. By default, telnet access is disabled. For more information, refer to
"Controlling Remote Administration" in the LifeSize Video Communications Systems
Administrator Guide.

Network Bandwidth

Poor audio and video quality may result from insufficient bandwidth on your network.
LifeSize recommends that your network be capable of at least 1 Mb/s for a high definition
video call. During video calls with lower bandwidths, LifeSize systems automatically select
the best resolution that can be achieved with the available bandwidth.

Domain Name Service Server

If you intend to use domain addresses for placing calls you must have a Domain Name
Service (DNS) server configured or use a Dynamic Host Configuration Protocol (DHCP)
server that automatically sets a DNS server.

Initial Configuration

During the installation process, your LifeSize system prompts you to configure it for the first
time. LifeSize recommends that you gather all the necessary information prior to installation.
The following sections provide guidelines for collecting and a means of recording this data.
You may need to consult your network administrator for network settings and system
identification information.
Note:
The initial configuration screens also appear when you perform a system reset. For
more information, refer to "Restoring Default Settings" in the LifeSize Video
Communications Systems Administrator Guide.
Language
Select the language to display in the user interface. The default is English.
LifeSize Room Installation Guide
5

Advertisement

Table of Contents
loading

Table of Contents