Air Conditioning Operation - Kipor Sinemaster IG3000 Operation Manual

When the SMART throttle is placed in the on position, engine speed is kept at idle automatically when
the electrical load is disconnected and returns to the proper speed required by the electrical load when
the load is reconnected. The engine speed varies according to the amount of load applied to the
generator. Placing the smart throttle in the on position is recommended to minimize fuel consumption
and engine noise while in operation.
When the smart throttle is in the off position, the engine runs at rated load RPM.

5.6 Air Conditioning Operation

For best results, the SMART throttle switch should be in the off position. Bring the generator to a
normal operating temperature before applying the air conditioning load. Always allow a 2 minute wait
period when manually cycling an air conditioner off and on. A longer wait period may be required
under unusually hot weather conditions. Additionally, all other loads should be turned off until the air
conditioner has started and is performing normally. It is also important to follow the air conditioner
manufacturer's instructions for starting and restarting for proper operation. Some air conditioner
manufacturers offer a start capacitor as an extra cost option. The lack of a start capacitor can cause
the air conditioner to draw too high a starting current and overload the generator. Contact your air
conditioner dealer if you consistently have problems starting your air conditioner with the generator.
This generator is not generally recommended for air conditioners exceeding 13,500 BTUs.
5.7 DC Power Application
When high electrical load appliances are connected simultaneously,
turn the SMART throttle switch to the OFF position to reduce voltage
fluctuation.
The SMART throttle system does not operate efficiently if the
electrical appliance will be used in a rapid on-off or low to high rpm
mode.
14