Table of Contents
Advertisement
CP50 Mobile Computer
1.8. DIRECT DATA CONNECTION
"Direct" data connection means "hardwired" data connection between the mobile computer
and a Windows-based PC as opposed to wireless connection. Direct data connection relies
on a serial cable or a USB cable (sometimes plus an auxiliary cradle) between the two.
Once the mobile computer and a PC are "directly" connected with each other by an RS-232
serial or USB cable, they can sync data with each other, and the mobile computer, more
precisely the SD card in it, can mount the PC as mass storage.
1.8.1. USE CABLE
Direct data connection using a cable:
1) Connect the mobile computer to your PC with a USB or RS-232 serial cable. Fix the cable
to both sides.
2) Power on the mobile computer if you haven't.
3) On the mobile computer, open Start screen, tap Settings | Connections | USB
Connection
USB Connection opens.
4) Select ActiveSync or Mass Storage.
Note: Mass Storage only mounts the external SD card.
5) Tap the "OK" command on
See
Syncing Tools
Figure 11: Direct Data Connection Using Cable
40
.
Softkey bar
and subsequent sections to understand how to use ActiveSync.
to apply the change and quit setting.
Reference Manual
Advertisement
Table of Contents
