Table of Contents
Advertisement
Step 3: Roof Panel Assembly
It is strongly recommended that you use a ladder for the
final steps of the gazebo assembly.
1.
Prior to installing the roof panels, a center line must
be drawn on the top side of each rafter (Figure A).
2.
Place each roof panel in place (with the edge being
flush with the center line) and mount using drywall
screws (Figure B).
3.
Use 2 1/2" drywall screws to mount all ridge caps
(Figure C).
4.
Set the roof assembly onto the wall panel assembly
and attach using drywall screws.
2008 Gazebo Owner's Manual
LTR20081011, Rev. A
Timberline Gazebo Assembly
Page 41
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Gazebos and is the answer not in the manual?
Questions and answers