Step 2: Roof Frame Assembly - Cal Spas Gazebos Owner's Manual

Northeast Gazebo Assembly

Step 2: Roof Frame Assembly

It is suggested that the owner have a helper for the next
steps, as heavy objects must be lifted.
1. Take 3 2"x4"x46 1/2" pieces and attach them
together, making a triangle, and ensuring that the
45DE angle-cut is facing out (Figure A). This is the
top center frame.
2. Take three hip rafters and attach them to the 45DE
angle at each corner of the top center frame. Secure
using 2 1/2" screws (Figure A).
3. Place the assembled roof frame onto the assembled
wall panels (Figure A) and attach using the provided
2 1/2" screws.
4. Attach two roof panels (47"x109") and secure using
2 1/2" screws. Center each panel on the hip rafters
(Figure C).
5. Place moon roof (48"x48"x65 1/2") on top of roof
assembly and secure using 2 1/2" screws (Figure
C).
6. Attach the crown molding and roof ridgecaps with 2
1/2" screws (Figure B and C).
Page 36 2008 Gazebo Owner's Manual
LTR20081011, Rev. A