Step 1: Wall Panel Assembly - Cal Spas Gazebos Owner's Manual

Step 1: Wall Panel Assembly

Follow the written steps in conjunction
with the figures that are shown.
1. Stand two panels up side by side.
Attach the panels together using 5
drywall screws.
2. Repeat this step until all the panels
are attached. The figure shows you
which order to go in.
The rounded corners attach to the wall
panels the same way, with 5 drywall
screws. The owner must use care when
securing the wall panel and rounded
corner together, as any damage incurred
during assembly is not covered by the
warranty.
Use care when attaching the sides and
corners. Be sure that the windows do
not come in contact with the mounting
screws.
2008 Gazebo Owner's Manual
LTR20081011, Rev. A
Timberline Gazebo Assembly
Page 39