Bar And Corbel, Step, And Stool Assembly - Cal Spas Gazebos Owner's Manual

901 Spa Cabana Gazebo Assembly

Bar and Corbel, Step, and Stool Assembly

The following will tell you how to assemble your
bar and corbel, bar stool, and steps. If you have
any questions, problems with material and/or parts,
contact your local retailer.
Bar and Corbel
1. Place the bar top face down on the ground.
Use care when placing the bar top on the ground. It
is recommended that a sheet, or a blanket, be placed
on the ground with the bar top being placed on top of
the material.
2. Place the bar legs with the decorative finish
facing outward. Fasten to the bar top with 2 1/2"
screws.
3. Fasten bar corbel to bar top and bar legs with 2
1/2" screws.
Once the bar assembly is complete, place the bar
between the main support posts. Push the bar
assembly all the way against the spa. Attach the bar
to the main support posts by using 2 1/2" screws.
Page 20
Corbel fits into corner
Bar with corbels
2
3
INSTRUCTIONS
1. Place bar top face down.
2. Place bar legs w/detail facing outwards and fasten to bar top
with 2 1/2" screws.
3. Fasten bar corbel to bar top and bar legs with 2 1/2" screws.
1
Bottom View
2008 Gazebo Owner's Manual
LTR20081011, Rev. A
2