Advanced Process Screen - JVC GY-DV5100 Instructions Manual

Item Function
SKIN DTL Sets the Skin Detail function to ON or OFF.
DETECT ON : Skin Detail function activated.
OFF : Skin Detail function not activated.
☞ See "Using the Skin Detail Function" on page 95.
V.RESOLUTION Increases the vertical resolution.
● NORMAL : Vertical resolution of approx. 380 lines.
● V.MAX
: Vertical resolution of approx. 450 lines.
Note:
In the case of "V.MAX", colours may be found on the brighter portions
of the object depending on its color temperature.
WHITE CLIP Sets the point where white clipping is to take place for an input video
signal with a high luminance level.
108% : The luminance level is white-clipped at the point of 108%.
100% : The luminance level is white-clipped at the point of 100%. If the
screen appears too white even with the point set at 108%, set the
point at 100%.
KNEE Sets the knee point (brightness level) when the AUTO KNEE function is
POINT set to OFF.
ADVANCED Displays the ADVANCED PROCESS Screen.
☞ See "ADVANCED PROCESS Screen" on page 78.
PROCESS
PAGE BACK The TOP MENU returns when the SHUTTER dial is pressed with the
cursor at this position.
11. MENU SCREENS 11. MENU SCREENS
Variation Range Initial Setting
ON OFF
OFF
NORMAL NORMAL
V.MAX
108% 108%
100%
100% 100%
95%
90%
85%
80%
––––– –––––
––––– –––––
77 78

11-7 ADVANCED PROCESS Screen

Item Function
CINE MODE When set to ON, produces gamma curve close to the picture characteristics
of movies.
COLOR Used to set the color matrix. When set to ON, color reproduction becomes
MATRIX good. However, noise will increase.
5 types of color matrix functions are provided.
OFF : The function is OFF
STANDARD : Standard colour matrix
WARM : Colour adjustment with red tinge
EXTRA 1 to 3 : To set a color matrix other that those described above.
Select the desired option.
Note:
When CINE MODE is ON, "FIX" is displayed and setting is not possible.
GAMMA Compensates for the gamma curve that determines the reproducibility of
black color.
● To enhance the black color reproducibility. However, halftones will be
lost for white section
............... Increase the number
● When reproducibility of the black color is not so important
............... Decrease the number
Note:
When CINE MODE is ON, "FIX" is displayed and setting is not possible.
FLARE For correcting the entire black level when the flare phenomenon in which
<MASTER> light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To raise the entire black level...Increase the number
To lessen the entire black level...Decrease the number
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
FLARE <R> For correcting the black level of Rch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of red ... Increase the number
To strengthen tinge of red ... Decrease the number
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
FLARE <B> For correcting the black level of Bch when the flare phenomenon in which
light entering the lens is diffused and results in reflection that colors the
black portions of the image occurs.
To weaken tinge of blue ... Increase the number
To strengthen tinge of blue ... Decrease the number
Note:
When LOLUX is ON, "FIX" is displayed and setting is not possible.
SKIN COLOR Pressing the SHUTTER dial once when the cursor is at this position
ADJUST switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK The CAMERA PROCESS menu screen returns when the SHUTTER dial
is pressed with the cursor at this position.
Variation Range Initial Setting
OFF OFF
ON
OFF STANDARD
STANDARD
WARM
EXTRA1
EXTRA2
EXTRA3
MAX (5) NORMAL
4
to
NORMAL (0)
to
–4
MIN (–5)
OFF
MAX (10) NORMAL
9
to
NORMAL
to
–9
MIN (–10)