Viewing The Lcd Monitor - JVC GY-DV5100 Instructions Manual

5. PREPARATIONS

5-3 Viewing the LCD Monitor

The LCD monitor's orientation, angle, and brightness, etc. can be changed.
LCD lock and release knob
LCD monitor
LCD door
Downward
Upward 180
90 degrees
degrees
LCD monitor
OPEN
DISPLAY button
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO INPUT
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
LCD BRIGHT +/– button
LCD/VF (2/2) menu
––– LCD/VF(2/2) –––
BATTERY INFO VOLTAGE
TAPE REMAIN ON
TC/UB ON
AUDIO ON
LCD COLOR NORMAL
LCD PEAKINGS NORMAL
PAGE BACK
42
■ Opening the LCD monitor
Slide the LCD lock and release knob toward the rear section
to open the LCD monitor. Grasp the upper and lower edges
of the LCD monitor to open it easily.
■ Changing the orientation and angle of the LCD monitor
● With the LCD door in the open position, turn the LCD door.
The LCD door can be turned 180 degrees upward and 90
degrees downward.
● If the LCD door is turned 180 degrees upward and housed
in the camera body, the LCD monitor can be viewed from
outside while it remains housed in the camera body.
LCD monitor
■ Displaying on the LCD monitor
● When the DISPLAY button is pressed for a long time, the
display on the LCD monitor is switched between ON and
OFF.
● Each time the DISPLAY button is briefly pressed while the
LCD monitor is used for display, the contents change as
follows.
Image only Characters displayed magnified
Image and Characters
■ Adjusting the LCD monitor
● Brightness of screen : Adjust with the LCD BRIGHT +/–
button.
● Color saturation
: Adjust the LCD COLOR item on
the LCD/VF (2/2) menu.
● Contrast of screen
: Adjust the LCD PEAKING item on
the LCD/VF (2/2) menu.
5. PREPARATIONS
5-3 Viewing the LCD Monitor
The LCD monitor's orientation, angle, and brightness, etc. can be changed.
LCD lock and release knob
LCD monitor
LCD door
Downward
Upward 180
90 degrees
degrees
LCD monitor
OPEN
DISPLAY button
LCD BRIGHT DISPLAY
AUDIO
PULL
LEVEL OPEN
FRONT
REAR
CH-1 CH-2
CH-1 CH-2
AUDIO IN
AUDIO SELECT
CH-1 CH-2
AUTO
MANUAL
LCD BRIGHT +/– button
LCD/VF (2/2) menu
––– LCD/VF(2/2) –––
BATTERY INFO VOLTAGE
TAPE REMAIN ON
TC/UB ON
AUDIO ON
LCD COLOR NORMAL
LCD PEAKINGS NORMAL
PAGE BACK
E-42
■ Opening the LCD monitor
Slide the LCD lock and release knob toward the rear section
to open the LCD monitor. Grasp the upper and lower edges
of the LCD monitor to open it easily.
■ Changing the orientation and angle of the LCD monitor
● With the LCD door in the open position, turn the LCD door.
The LCD door can be turned 180 degrees upward and 90
degrees downward.
● If the LCD door is turned 180 degrees upward and housed
in the camera body, the LCD monitor can be viewed from
outside while it remains housed in the camera body.
LCD monitor
■ Displaying on the LCD monitor
● When the DISPLAY button is pressed for a long time, the
display on the LCD monitor is switched between ON and
OFF.
● Each time the DISPLAY button is briefly pressed while the
LCD monitor is used for display, the contents change as
follows.
Image only Characters displayed magnified
Image and Characters
■ Adjusting the LCD monitor
● Brightness of screen : Adjust with the LCD BRIGHT +/–
button.
● Colour saturation
: Adjust the LCD COLOR item on
the LCD/VF (2/2) menu.
● Contrast of screen
: Adjust the LCD PEAKING item on
the LCD/VF (2/2) menu.