JVC GY-DV5100 Instructions Manual page 62

11-10 LCD/VF Menu Screen
The LCD/VF menu screen consists of two screens. (1/2 screen, 2/2 screen)
■ LCD/VF (1/2) Menu Screen
Settings can be made on the LCD/VF (1/2) menu screen only in the Camera mode.
Item Function
ZEBRA Switches the luminance level of the subject sections where the zebra
pattern is displayed.
70-80% : Zebra pattern is displayed in sections with luminance
levels between 70% and 80%.
85-95% : Zebra pattern is displayed in sections with luminance
levels between 85% and 95%.
OVER 95% : Zebra pattern is displayed in sections with luminance
levels over 95%.
OVER 100% : Zebra pattern is displayed in sections with luminance
levels over 100%.
F.NO/ Selects whether or not the F-number of the lens iris/iris level mark is
IRIS IND. displayed in the status display on the LCD monitor or in the viewfinder.
(Status 1 screen)
OFF : F-number and iris level mark is not displayed.
F.NO : F-number is displayed.
F.NO+IND. : F-number and iris level mark is displayed.
FILTER Selects whether or not the FILTER position of the unit is displayed in the
status display on the LCD monitor or in the viewfinder. (Status 1 screen)
OFF : FILTER position is not displayed.
ON : FILTER position is displayed.
SAFETY Selects whether or not the safety zone is shown on the LCD monitor or in
ZONE the viewfinder together with the form of the safety zone indication.
OFF : Not displayed
NORMAL : 4:3 zone is displayed.
16:9 : 16:9 zone is displayed.
CENTER Sets whether or not a center mark is displayed when the safty zone is
MARK
displayed.
ON : Center mark is displayed.
OFF : Center mark is not displayed.
CAUTION:
When the SAFETY ZONE item is set to OFF, "- - -" is indicated and
this item cannot be selected.
NEXT PAGE
To display the LCD/VF (2/2) menu screen, align the cursor with this item
and then press the SHUTTER dial.
PAGE BACK The TOP MENU screen returns when the SHUTTER dial is pressed while
the cursor is at this position.
11. MENU SCREENS
Variation Range Initial Setting
70-80% 70-80%
85-95%
OVER 95%
OVER 100%
OFF OFF
F.NO
F.NO+IND.
OFF OFF
ON
OFF OFF
NORMAL
16:9
ON ON
OFF
––––– –––––
––––– –––––
81
11. MENU SCREENS
11-10 LCD/VF Menu Screen (Cont'd)
■ LCD/VF (2/2) Menu Screen
Item Function
BATTERY Selects whether the remaining battery level should be shown in minutes
INFO [min], percentage [%] or voltage [V] in the LCD monitor or viewfinder.
VOLTAGE : Indicates battery voltage in 0.1 V steps.
TIME : Remaining battery is shown in minutes [min].
CAPA% : Remaining battery is shown in percentage [%].
changes as shown below according to the remaining battery level.
: 50% or more : 10% to less than 50%
MEMO
:
● When remaining battery level is set to TIME or CAPA%, "
is shown when battery level becomes less than 10%.
● Remaining battery levels in [min] and [%] can be selected when
an Anton-Bauer Battery Holder (QR JVC DIGI) is attached.
Remaining battery level is shown automatically in [V] when using
other battery holders.
● When remaining battery level is set to TIME or CAPA% and
information from the battery is not correct (calibration required),
the display switches between voltage [V] and "
seconds.
TAPE Selects whether or not the remaining tape time (minutes) is shown in the
REMAIN status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
TC/UB Selects whether or not the time code or user's bits data should be shown
in the status display on the LCD monitor or in the viewfinder.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
* Whether the time code or user's bits data is shown is selected with the
COUNTER switch.
AUDIO Selects whether the audio level meters should be shown in the status
display on the LCD screen and the viewfinder screen.
(Camera mode: Status 1 screen, VTR mode: Status screen)
OFF : Not displayed.
ON : Displayed.
LCD COLOR Adjusts the color saturation of the LCD monitor.
LCD Adjusts the contour of the LCD monitor.
PEAKING
PAGE BACK To return to the LCD/VF (1/2) menu screen, align the cursor with this
position and then press the SHUTTER dial.
82
Variation Range Initial Setting
VOLTAGE VOLTAGE
TIME
CAPA%
: 10% or less
RES"
CAL" every 2
OFF ON
ON
OFF OFF
ON
OFF OFF
ON
MAX (5) NORMAL
4
to
NORMAL
to
–4
MIN (–5)
MAX (5) NORMAL
4
to
NORMAL
to
–4
MIN (–5)
––––– –––––