How To Use Skin Detail - JVC GY-DV5100 Instructions Manual

12. FEATURES OF THE CAMERA SECTION

12-7 How to Use Skin Detail

The contour emphasis in the skin color areas of the video signal can be controlled and made to appear gentle and smooth.
OPEN
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
LCD BRIGHT DISPLAY
MENU
AUDIO PULL
LEVEL OPEN
REAR FRONT
AUTO IRIS FULL AUTO BLACK LOLUX CH-1 CH-2
MODE CH-1 CH-2
BACK L STRETCH AUDIO SELECT AUDIO IN
NORMAL NORMAL VTR CH-1 CH-2
SPOT L COMPRESS CAM AUTO MANUAL
POWER VTR
ON OFF
2. 3. 4. 5. 6.
1.
STATUS button
7. 8.
SHUTTER dial
SHUTTER
MENU
––– MENU –––
CAMERA OPERATION..
Cursor
CAMERA PROCESS..
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET CANCEL
EXIT
TOP MENU screen
––– CAMERA PROCESS –––
MASTER BLACK NORMAL
DETAIL NORMAL
DTL.V/H BALANCE NORMAL
DTL.FREQUENCY MIDDLE
SKIN DTL.DETECT ON
V.RESOLUTION NORMAL
WHITE CLIP 108%
KNEE POINT 100%
ADVANCED PROCESS..
PAGE BACK
CAMERA PROCESS menu screen
––– ADVANCED PROCESS –––
CINE MODE OFF
COLOR MATRIX STD
GAMMA NORMAL
FLARE<MASTER> NORMAL
FLARE<R> NORMAL
FLARE<B> NORMAL
SKIN COLOR ADJUST..
PAGE BACK
ADVANCED PROCESS screen
––– SKIN COLOR ADJUST –––
Detection
ERROR
area
SKIN COLOR DET. EXECUTE
SKIN COLOR RANGE NORMAL
PAGE BACK
SKIN COLOR ADJUST screen
SKIN COLOR ADJUST screen
94
■ Setting the Color and Range of the Skin Detail
Function
1.
Press the STATUS button for about 1 second to display the
TOP MENU screen.
2.
Turn the SHUTTER dial downward to align the cursor ( )
with the CAMERA PROCESS item. Then press the
SHUTTER dial in the direction of the arrow to display the
CAMERA PROCESS menu screen.
3.
Turn the SHUTTER dial downward to align the cursor ( )
with the ADVANCED PROCESS item. Then press the
SHUTTER dial in the direction of the arrow to display the
ADVANCED PROCESS menu screen.
4.
Turn the SHUTTER dial downward to align the cursor ( )
with the SKIN COLOR ADJUST item. Then press the
SHUTTER dial in the direction of the arrow to display the
SKIN COLOR ADJUST screen.
● When the ASPECT RATIO is set to SQUEEZE setting,
the screen ratio changes to 4:3.
● The frame shown on the screen indicates the detection
area of the skin detail function.
5.
When the cursor ( ) is aligned with the SKIN COLOR DET.
item, the SHUTTER dial is pressed in the direction of the
arrow and EXECUTE selected, the skin color detection
mode is activated.
6.
Shoot so that the area with the color that you want to detect
is brought within the detection area frame. To decide on the
color for the detection, press the SHUTTER dial to set SKIN
COLOR DET. to STOP.
● The color is recognized as a color that the skin detail
function works with.
● The areas recognized by the skin detail function appear
with superimposed zebra patterns.
● If the color is not recognized as a color that the skin detail
function works with, "ERROR" is displayed on the screen.
7.
If you want to change the color range recognized by the
skin detail function, perform the following operations.
Set the SKIN COLOR DET. item to EXECUTE.
Turn the SHUTTER dial to align the cursor ( ) with SKIN
COLOR RANGE, and then press the SHUTTER dial in
the direction of the arrow.
The area with the setting value starts blinking, and
the value can now be changed.
Turn the SHUTTER dial up or down to widen or narrow
the colour range.
● Adjust the range while observing the zebra patterns.
To decide the colour range, press the SHUTTER dial in
the direction of the arrow.
The setting value stops blinking but remains lit.
8.
To stop the SKIN COLOR ADJUST operation, align the
cursor ( ) with PAGE BACK and press the SHUTTER dial
in the direction of the arrow.
● If the ASPECT RATIO is set to SQUEEZE, the screen
returns to SQUEEZE display.
12. FEATURES OF THE CAMERA SECTION
■ Using the Skin Detail Function
To use the skin detail function set on the SKIN COLOR ADJUST
screen, select "ON" for the SKIN DTL DETECT item on the
FAS
6dB
CAMERA PROCESS menu screen.
FAW
I
While the Skin Detail function operates, the "SD" indicator is
"SD"
SD
B
displayed on the Status 0 and Status 1 screen in the viewfinder
display
12.2V
or LCD monitor.
01/02/03 01:23:45
Status 0
■ Confirming the color tone area adjusted
with the Skin Detail function
When the ZEBRA switch on the front section is pressed to the
"SKIN AREA" side, Skin Detail function turns on, zebra patterns
are indicated in the colour tone areas adjusted with Skin Detail
and displayed in the viewfinder or on the LCD monitor.
MEMO:
OFF ZEBRA
When the ASPECT RATIO item on the CAMERA
SKIN AUTO
ON
AREA WHITE
OPERATION menu is set to SQUEEZE setting, zebra
ACCU
FOCUS
patterns are not displayed.
VTR
AUDIO
LEVELE CH-1
5
ZEBRA switch
95