Outputting Color Bars - JVC GY-HD200U Instructions Manual

Outputting Color Bars

This device can output three types of color bars, depending
on the camera settings.
NTSC standard : Outputs color bars compliant with the
SMPTE standard.
PAL standard : Outputs color bars compliant with the
EBU standard.
16:9 screen : Outputs multi-format color bars.
To output color bars, make the following settings.
1.
Turn the FULL AUTO switch to "OFF".
2.
Set the BARS item on the CAMERA OPERATION menu
screen to "ON". X See page 77.
• Color bars are output.
USER button
Outputting color bars using the USER buttons
1.
Turn the FULL AUTO switch to "OFF".
2.
Assign "BARS" to one of the USER1, 2 or 3 buttons.
X See "SWITCH MODE Menu Screen" on page 83.
3.
Press the USER button to which "BARS" was assigned.
• Color bars are output.
MEMO
• You can select whether to output an audio test signal
during color bar output using the TEST TONE item on
the AUDIO/MIC[1/2] menu screen. X See page 84.
• Color bars are not output when FULL AUTO mode is ON
or in VTR mode.
FULL AUTO switch
101