Suzuki Canvas SQ416 Service Manual page 44

1. Wheel spindle
2. Drive shaft bearing
1. Wheel spindle
2. Drive shaft
bearing
3. Front drive
shaft thrust
washer
4. Inner oil seal
1. Drive shaft bearing
2. Wheel spindle
"A"
"B"
11) Remove drive shaft bearing by using special tool.
Special Tool
(A): 09923-74510
(B): 09930-30102
INSTALLATION
Reverse removal sequence to install knuckle, wheel spindle oil seal
and drive shaft bearing,noting following points.
Install front drive shaft thrust washer with its chanfered side facing
to drive shaft side.
Install drive shaft bearing by using special tool.
Special Tool
(A): 09913-80112
Depth "a": 1.75 – 2.50 mm (0.069 – 0.098 in.)
NOTE:
When installing wheel spindle to knuckle, coat their mating
surfaces with sealant.
"A": Sealant 99000-31110
Also, fill recess in wheel spindle with about 10 g lithium
grease.
"B": Grease 99000-25010
Tighten wheel spindle nut to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
FRONT SUSPENSION 3D-7