Suzuki Canvas SQ416 Service Manual page 16

3
1. Dual pressure switch
2. Condenser cooling fan motor coupler
3. Condenser outlet pipe
1
1. Condenser assembly
2. Condenser dryer section
5) Disconnect coupler from dual pressure switch.
6) Disconnect condenser outlet pipe.
7) Disconnect condenser cooling fan motor coupler.
8) Remove condenser with fan.
NOTE:
Be careful not to damage fins of condenser and radiator.
9) Remove cooling fan from condenser.
INSTALLATION
Reverse removal sequence to install condenser, noting following
point.
1) When replacing condenser, add 20 to 30 cc of refrigerating oil
from compressor suction-side.
2) Evacuate and charge system according to previously-described
procedure.
REPLACEMENT OF CONDENSER DRYER
REMOVAL
1) Remove condenser assembly from vehicle (refer to "CON-
DENSER ASSEMBLY REMOVAL" in this section).
2) Remove the cap using a hexagon wrench.
2
3) Remove the filter from the receiver.
1. Filter
AIR CONDITIONING (OPTIONAL) 1B-7