To remove the power supply, do the following:
1.
2.
3.
4.
Speaker
To remove the speaker, do the following:
1.
2.
3.
4.
System board
To remove the system board, do the following:
1.
2.
3.
4.
5.
68
IBM : Hardware Maintenance Manual
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 48.
Disconnect all power supply wires.
Remove the two screws holding the power supply to the back of the chassis.
Lift out the power supply.
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 48.
Rotate the power supply out. See "Moving the power supply" on page 50
Disconnect the speaker wire.
Slide the speaker out of the bracket.
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 48.
See "Moving the power supply" on page 50
Disconnect all wires connected to the system board.
Remove the six screws that attach the system board to the chassis.
Lift out the system board.