System Board; Air Baffle; Desktop Removals - IBM 6343 Hardware Maintenance Manual
Hide thumbs
Also See for 6343:
- Hardware maintenance manual (230 pages) ,
- Benutzerhandbuch (92 pages) ,
- User manual (90 pages)
Table of Contents
Advertisement
System board
Air baffle
Desktop removals
To remove the system board, do the following:
1.
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 26
2.
Remove the air baffle. See
3.
Disconnect all wires connected to the system board.
4.
Rotate the drive chassis over the system board and lock it in the upright position.
5.
Remove the support arm by pulling it out.
6.
Remove the seven screws that attach the system board to the chassis.
7.
Lift out the system board.
To remove the air baffle, do the following:
1.
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 26.
2.
With both hands, squeeze the air baffle to release the tabs from the chassis.
3.
Lift out the air baffle.
Chapter 5. FRU Removals
63
Advertisement
Table of Contents
