IBM 6343 Hardware Maintenance Manual page 44

5.
1 Rope Clip
2 Bolt holes
3 Nuts
Replacing the cover and connecting the cables
After working with options, you need to install any removed parts, replace the cover,
and reconnect cables, including power cords and telephone lines. Also, depending on
the option that is installed, you might need to confirm the updated information in the
IBM Setup Utility program.
To replace the cover and connect cables to your computer:
1.
2.
3.
36
IBM : Hardware Maintenance Manual
Thread the cable through the Rope Clip and around an object that is not a part of
or permanently secured to the building structure or foundation, and from which
it cannot be removed; then fasten the cable ends together with a lock.
What to do next:
To work with another option, go to the appropriate section.
Ensure that all components have been reassembled correctly and that no tools or
loose screws are left inside your computer.
Clear any cables that might impede the replacement of the cover.
Position the cover over the chassis and pivot it down over the computer until it
snaps into place.