Obtaining Device Drivers; Installing Internal Options - Small Desktop Model - IBM 6343 Hardware Maintenance Manual

USB connectors
Serial connectors
Parallel connector
Ethernet connector
Microphone connector
Audio line out connector
Audio line in connector

Obtaining device drivers

You can obtain device drivers for operating systems that are not preinstalled at
http://www.ibm.com/pc/support/ on the World Wide Web. Installation instructions
are provided in README files with the device driver files.
Installing internal options — small desktop model
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the instructions
that come with the option.
Removing the cover
Important: Before you install or remove any option, read "Safety information" on
page 101. These precautions and guidelines will help you work safely.
26
IBM : Hardware Maintenance Manual
Used to attach a device that requires a Universal Serial Bus
(USB) connection, such as a USB scanner or USB printer. If you
have more than four USB devices, you can purchase a USB hub,
which you can use to connect additional USB devices.
Used to attach an external modem, serial printer, or other
devices that use a 9-pin serial connector.
Used to attach a parallel printer, parallel scanner, or other
devices that use a 25-pin parallel connector.
Used to attach an Ethernet cable for a Local Area Network
(LAN).
Note: To operate the computer within FCC Class B limits, use
a category 5 Ethernet cable.
Used to attach a microphone to your computer when you want
to record voice or other sounds on the hard disk if you use
speech-recognition software.
Used to send audio signals from the computer to external
devices, such as powered stereo speakers (speakers with built-
in amplifiers), headphones, multimedia keyboards, or the audio
line in connector on a stereo system or other external recording
device.
Used to receive audio signals from an external audio device,
such as a stereo system. When you attach an external audio
device, a cable is connected between the audio line out
connector of the device and the audio line in connector of the
computer.