Installing Internal Options - Desktop Model - IBM 6343 Hardware Maintenance Manual

4. Reconnect the external cables and cords to the computer. See "Installing external
options" on page 21.
5. To update the configuration, see "Configuring the computer" on page 21.
Installing internal options — desktop model
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the instructions
that come with the option.
Removing the cover
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
from the drives, and turn off all attached devices and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer.
4. Press the buttons on the sides of the computer and pivot the rear end of the cover
up toward the front of the computer.
Chapter 4. Installing Options
37