IBM 6343 Hardware Maintenance Manual page 55

Hide thumbs Also See for 6343:
Table of Contents

Advertisement

5.
Thread the cable through the Rope Clip and around an object that is not a part of
or permanently secured to the building structure or foundation, and from which
it cannot be removed; then fasten the cable ends together with a lock.
1 Rope Clip
2 Bolt holes
3 Nuts
What to do next:
To work with another option, go to the appropriate section.
Replacing the cover and connecting the cables
After working with options, you need to install any removed parts, replace the cover,
and reconnect any cables, including power cords and telephone lines. Also,
depending on the option that is installed, you might need to confirm the updated
information in the IBM Setup Utility program.
To replace the cover and connect cables to your computer:
1.
Ensure that all components have been reassembled correctly and that no tools or
loose screws are left inside your computer.
2.
Clear any cables that might impede the replacement of the cover.
3.
Position the cover over the chassis and pivot it down over the computer until it
snaps into place.
Chapter 4. Installing Options
47

Advertisement

Table of Contents
loading

This manual is also suitable for:

679063506349679167922292 ... Show all

Table of Contents