Hard disk drive
To remove the hard disk drive, do the following:
1.
Turn off the server and peripheral devices and disconnect all external cables and
power cords; then, remove the cover. See "Removing the cover" on page 48.
2.
Disconnect all hard disk drive wires.
3.
Push in on the two tabs to rotate the hard disk drive out.
4.
Push in on the rail guides and slide the hard disk drive out.
Note: When replacing the hard disk drive, make sure you obtain the proper
Recovery CD to install after you install the new hard drive.
Power supply
Chapter 5. FRU Removals
67