System Board; Disconnecting Cables - IBM 2179 User Manual

System board

1 Fan connector
2 Microprocessor
3 DIMM sockets (SDRAM)
4 Power connector
5 CD-ROM or DVD-ROM drive
connector
6 Diskette drive connector

Disconnecting cables

To disconnect cables, do the following:
1. Remove any media (diskettes or CDs) from the drives and shut down your
operating system.
2. Read the "Safety notices" on page vii.
3. Read "Handling static-sensitive devices" on page 37.
4. Turn off all attached external devices and turn off the computer.
Top of Monitor
7 Hard disk drive connector
8 CMOS clear jumper
9 Battery
10 PCI expansion slot
11 PCI expansion slot
12 CD-ROM or DVD-ROM drive audio
connector
Chapter 5. Installing options
39