Chapter 3. Installing Internal Options - Small Desktop Model; Removing The Cover - IBM 2292 User Manual

Chapter 3. Installing internal options — small desktop model
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the
instructions that come with the option.

Removing the cover

To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Press the buttons on the sides of the computer and pivot the rear end of the
© Copyright IBM Corp. 2001
Important
Read before removing the cover "Safety Information" on page v and
"Handling static-sensitive devices" on page 8.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
cover up toward the front of the computer.
17