Chapter 3. Installing internal options — small desktop model
You can expand the capabilities of your computer by adding memory, drives, or
adapters. When installing an option, use these instructions along with the
instructions that come with the option.
Removing the cover
To remove the cover:
1. Shut down your operating system, remove any media (diskettes, CDs, or tapes)
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
4. Remove the screw that secures the top cover at the rear of the system unit.
5. Hold both sides of the system unit top cover and push it forward. Lift the top
© Copyright IBM Corp. 2001
Important
Read before removing the cover "Safety Information" on page v and "Handling
static-sensitive devices" on page 9.
from the drives, and turn off all attached devices and the computer.
input/output (I/O) cables, and any other cables that are connected to the
computer.
cover up to remove it completely.
19