Advanced View - TANDBERG MCU User Manual

Actions
During the conference, the conference administrator is able to control each participant.

Advanced view

Gives detailed information on the audio in, audio out and video in protocols and the bandwidth used by these
protocols. For full participant details, click in the participant name and a 'Call Info' page is shown.
TANDBERG MCU
To disconnect a participant, press the 'Disconnect' button. A confirmation window will be
shown. Press 'OK' to disconnect.
If a participant has been disconnected from the conference, the 'Redial' button is shown.
Press the button to reconnect the participant. The button is only available for outgoing
MCU calls.
To assign the floor to a participant, press the 'Assign Floor' button. The participant is
then transmitting video to all the other participants. The participants can also perform this
function themselves, if they support the Request Floor (H.243 MVC) functionality.
To release the floor again, press the 'Release Floor' button. This button is shown if the
floor has been assigned by the conference administrator or if the participant have request
the floor themselves.
To mute a participant, press the 'Mute Site' button and the participant will not be heard
by the other participants. Note that muted participants will not be able to 'un mute'
themselves, since this is done on the MCU. The participants can independently of this
function, mute their microphone locally on their system.
To un-mute a participant again, press the 'Un Mute' button. This button is only shown if
the audio has been muted by the conference administrator.
31
Using the MCU