Quality Of Service; Qos Mode Configuration - TANDBERG MCU User Manual

Quality of Service

The network must support Quality of Service for these settings to work.
RSVP
Off
Auto
QoS Mode
Off
Diffserv
Precedence

QoS Mode Configuration

Diffserv is used to define which priority audio, video, data and signaling packets should have in an IP network. The
priority ranges from 0 to 63 for each type of packets.
Precedence is used to define which priority audio, video, data and signaling should have in an IP network. The
higher the number, the higher the priority. The priority ranges from 0 (off) to 7 for each type of packets.
In addition to Precedence, Type of Service can be used and enables the user to define what type of connection
that should be chosen for the IP traffic. Helps a router select a routing path when multiple paths are available.
Off
Min. Delay
Max. Throughput
Max. Reliability
Min. Cost
Save
Press 'Save' to activate the new settings.
TANDBERG MCU
No RSVP Quality of Service is initiated for any connections.
Resource Reservation Protocol enables the MCU to request the optimal amount of
bandwidth for the duration of an IP video call.
No QoS is used.
Diffserv QoS method is used. Please see 'QoS Mode Configuration' for details.
IP Precedence QoS method is used. Please see 'QoS Mode Configuration' for details.
Sevice not active.
Will choose a route where minimum delay is prioritized.
Will choose the route with highest bandwidth.
Will choose the route where minimum packet loss is prioritized.
Will choose the cheapest connection available.
49
Configure the MCU