Miscellaneous Configuration - TANDBERG MCU User Manual

TANDBERG MCU
Configure the MCU

Miscellaneous Configuration

To configure the miscellaneous settings on the MCU, open 'Misc' as shown in the figure below.
Configuration
To change the system name of the MCU, enter the new system name in the 'System Name'.
Password
To change the system password of the MCU, enter the new password in the 'New Administrator Password'.
To delete the existing password, select 'Delete Password'.
Services
The different IP services on the MCU - FTP, Telnet, Telnet Challenge, HTTP, HTTPS and SNMP can be
independently disabled to prevent access to the MCU.
In addition, the SNMP Service Read Only/Traps Only will make it possible to read SNMP messages in addition to
enable/disable SNMP.
52