TANDBERG MCU User Manual page 29

Disconnected
Clear Out
Net
Shows the network protocol used for the connection.
H323
H320
ISDN
Audio
Shows the audio status for each participant.
Video
Shows the video status for each participant.
TANDBERG MCU
The participant has either disconnected or been disconnected by the conference
administrator.
The MCU is currently disconnecting the participant.
The participant is connected on IP using the H.323 protocol.
The participant is connected on ISDN using the H.320 protocol.
The participant is connected on ISDN as a telephone.
The participant is transmitting audio.
The participant has muted the microphone.
The participant is connected as a telephone.
The conference administrator has manually muted the participant.
The participant is transmitting video.
The participant is not transmitting video, for instance when the participant has set the
video to 'Off'.
29
Using the MCU