TANDBERG MCU User Manual page 47

TANDBERG MCU
Configure the MCU
Static IP Address
The Static IP Address defines the network address of the MCU. This address is only used in static mode. Your
LAN administrator will provide you with the correct address for this field.
Static IP Subnet Mask
The Static IP Subnet Mask defines the type of network. Your LAN administrator will provide the correct value for
this field.
Static IP Gateway
The Static IP Gateway defines the Gateway address. Your LAN administrator will provide the correct value for this
field.
Save
When ready to store the new settings, press 'Save'. These settings will take effect when the system is restarted.
Restart
This button will restart the MCU. Any changes made after pressing 'Save' in the IP Configuration will then take
effect.
47