Using The Speakerphone - Siemens HiPath 500 Operating Instructions Manual

Enhanced phone functions
Step by Step
Mute off
HF answerback on
HF answerback off
44
or
T
Press the flashing key.
Accepting a call in a team

Using the speakerphone

A colleague addresses you directly over the speaker
with a speaker call. You hear a tone before the an-
nouncement. The other party's name or station number
appears on the screen.
You can conduct the call with the handset or in speaker-
phone mode.
^
Lift the handset and answer the call.
or
Press the "OK" key to confirm your selection and answer
the call.
or
p
Press the key and answer the call.
If handsfree answerback is enabled (see below),
you do not need to switch on the microphone -
you can answer directly. You can answer immedi-
ately in speakerphone mode.
If handsfree answerback is disabled (default set-
ting), follow the procedure described above.
Placing a speaker call to a colleague
Enabling and disabling handsfree answerback
c
Open the idle menu
Select and confirm the option shown,
or
Select and confirm the option shown.
page 110.
page 22.
page 53.