Siemens HiPath 500 Operating Instructions Manual page 69

Step by Step
Trunk group key:
S
At least one trunk is free.
R
All lines in this trunk group are occupied.
View call charges:
S
No chargeable calls have been set up since the last
check.
R
Chargeable calls have been set up since the last check.
Call forwarding, Forward Line:
T
Flashing slowly - your line is a call forwarding destinati-
on.
Fax details:
S
No fax received or no message on the answering machi-
ne.
R
Fax received or message on the answering machine.
View number of calls:
S
No waiting callers.
T
Flashing quickly - callers waiting (certain number is ex-
ceeded).
Flashing quickly - callers waiting (certain number is rea-
ched).
Data I/O Service:
S
No connection to an application.
R
Active connection to an application.
T
Flashing slowly, connection to an application is tem-
porarily interrupted.
The following functions programmed on keys do
not have a LED function:
Repdial key (external), Procedure key, Trace call, Speed
dial, Clear, Lock all phones, Send message, Directory
(1=internal, 2=LDAP (not for HiPath 500), Call waiting,
Toggle/Connect, Conference, Speaker call, Retrieve
line, Reserve trunk, Release trunk, Temporary Phone,
Override, Park a call, Pickup - directed, Pickup - group,
Account code, Show call charges, Page (not for
HiPath 500), Answer page, Timed reminder, Open door,
DTMF dialing, Recall-key, Room monitor, Hold key, Con-
sult internal, Consultation, Associated dial, Associated
serv., Tel. data service, Relocate, Discreet Call (not for
HiPath 500).
Programming sensor keys
69