Conducting A Conference - Siemens HiPath 500 Operating Instructions Manual

Enhanced phone functions
Step by Step
Start conference
Conference
Return to held call
Conference g
Add party
Conference
23189 Coco g
Remove party
Conference g
Leave conference
60

Conducting a conference

In a conference call, you can talk to as many as four
other parties at the same time. These may be internal
or external users.
You can only add parties to or remove them from
a conference if you initiated the conference.
j
Call the first party.
Select and confirm the option shown.
j
Call the second party. Announce the conference.
Select and confirm the option shown.
A tone sounds every 30 seconds to indicate that a con-
ference is in progress.
If the second party does not answer
Confirm.
Adding up to five parties to a conference
Confirm.
Confirm.
j
Call the new party. Announce the conference.
Select and confirm the option shown.
Removing parties from the conference
You are connected to a conference and wish to discon-
nect one of the participants.
Select and confirm the party you want.
Confirm.
Leaving a conference
Confirm.
Select and confirm the option shown.
or
\
Replace the handset, if this feature is configured (con-
tact your service personnel).