Individual Phone Configuration; Adjusting Display Settings; Adjusting The Display To A Comfortable Reading Angle; Illuminated Display - Siemens HiPath 500 Operating Instructions Manual

Step by Step
+
Display contrast
+
+
Key label contrast
+

Individual phone configuration

Adjusting display settings

Adjusting the display to a comfortable rea-
ding angle
You can swivel the display unit. Adjust the display unit
so that you can clearly read the screen.

Illuminated display

During operation, e. g. when entering a number, the
display automatically lights up. The display lighting swit-
ches off automatically a few seconds after finishing the
last action.

Setting contrast

The display has four contrast levels that you can set ac-
cording to your light conditions.
-
or
Press one of the keys shown in idle mode
Select and confirm the option shown.
-
or
Keep pressing the key until the desired contrast is set.
i
Save.
Adjusting displays on the
Open Stage Key Module
You can adjust the contrast setting for any OpenStage
Key Module connected to suit the current light conditi-
ons (eight settings available).
-
or
Press one of the keys shown in idle mode
Select and confirm the option shown.
-
or
Keep pressing the key until the desired contrast is set.
i
Save.
Individual phone configuration
page 21.
page 21.
119