Making Calls; En-Bloc Sending/Correcting Numbers - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Please dial
Cancel

Making calls

En-bloc sending/correcting numbers

You can enter the number without the number being di-
aled straight away. This means that you can correct the
number if necessary.
The station number is only dialed at your specific re-
quest.
Prerequisite: You have activated "Call preparation"
page 28.
j
Internal calls: Enter the station number.
External calls: Enter the external code and the station
number.
Dialing entered/displayed numbers
^
Lift the handset.
or
Confirm.
Correcting numbers entered
A station number can only be corrected as it is
being entered. Station numbers stored for num-
ber redial, for example, cannot be corrected.
a
Press.
The last digit entered in each case is deleted.
j
Enter the required digit(s).
Canceling en-bloc sending
Select and confirm the option shown.
or
n
Press the key shown. The LED goes out.
or
s
Press the key shown.
Enhanced phone functions
47