Image Compression - Datalogic Magellan 800i Reference Manual

Image Compression

Specifies the starting image compression factor for JPEG images. A higher number specifies a
higher quality image with less compression than a relative lower number for the same image.
A value of 100 means minimal compression. A value of 1 means maximum compression at a loss
of quality. Follow these steps to program this feature:
1. Scan the START bar code.
2. Scan the Set Image Compression bar code.
3. Turn to
4. Scan the END bar code.
START / END
03ED1E(CR)
Image Compression = 50
(medium compression — medium quality)
03ED64(CR)
Product Reference Guide
Alphanumeric Pad
compression. The configurable range is 01-0x64 by increments of 01.
PROGRAMMING BAR CODES
and scan the two digits (zero-padded) representing the desired
Image Compression = 30
(higher compression — lower quality)
03ED32(CR)
Image Compression = 100
(minimal compression — higher quality)
Image Capture
DEFAULT
21