Image Compression; Image Size - Datalogic Magellan 1100i Product Reference Manual

General Features

Image Compression

Specifies the starting image compression factor for JPEG images. A higher number specifies
a higher quality image with less compression than a relative lower number for the same
image.
A value of 100 means minimal compression. A value of 1 means maximum compression at
a loss of quality. Follow these steps to program this feature:
1. Scan the START barcode.
2. Scan the Set Image Compression barcode.
3. Turn to
4. Scan the END barcode.
START / END

Image Size

Specifies the size of the image capture. Choices are:
•
•
START / END
Image Size = VGA
24
Alpha-Numeric Pad
desired compression. The configurable range is 01-0x64 by increments of 01.
PROGRAMMING BARCODES
WVGA
VGA
PROGRAMMING BARCODES
and scan the two digits (zero-padded) representing the
Set Image Compression
DEFAULT SETTING IS
100 (minimal compression — higher quality)
Image Size = WVGA
DEFAULT
Magellan TM 1100i