Check Digit Transmit; Number Of Check Characters - Datalogic Magellan 800i Reference Manual

Symbologies
MSI/Plessey — continued

Check Digit Transmit

When this option is enabled, the scanner will transmit one-digit or two-digit check digits,
depending upon the setting for check digit verification. Applies when the feature
Verification on page 115
START / END
00BE00(CR)
Enable Check Digit Transmission
DEFAULT

Number of Check Characters

Specifies number of MSI/Plessey check characters to be calculated and verified. Check charac-
ters are always modulus 10.
START / END
021700(CR)
2 Check Characters
116
is enabled.
PROGRAMMING BAR CODES
PROGRAMMING BAR CODES
Disable Check Digit Transmission
00BE01(CR)
1 Check Character
DEFAULT
021701(CR)
Check Digit
Magellan TM 800i